Search    

SOLVASTRIP:

Solvastrip is a non-ammoniated floor stripper which is easy to use and work's first time. Mix Solvastrip 50, 50 with hot water. Leave for 10 minutes, scrub with hard broom, using hot water mop up remaining liquid left on surface, then rinse surface with clean hot water.

Item Code: F42

Pack Size: 5lt & 25lt

SHINESOLVE 22%:

Shinesolve is a 22% self shine floor polish. Because of its high concentrate being 22%, it is a very hard wearing, high shine, non-slip floor polish. When using high percentage floor shine, it means you save on labor due to the fact that one does not have to polish or apply as often and is longer lasting, as one does not need to strip the polish as often. Method: Strip floor using Solvastrip, apply Shinesolve 22% with lamb's wool applicator, leave to dry for a minimum of 1 hour, apply second coat.

Item Code: F43

Pack Size: 5lt & 25lt

SHINESOLVE B:

Shinesolve B bears the SABS 1042 mark. Shinesolve B is a 15% self shine floor polish. Method: Strip floor using Solvastrip, apply Shinesolve B with lamb's wool applicator, leave to dry for a minimum of 1 hour, apply second coat.

Item Code: F45

Pack Size: 5lt & 25lt

SEALER:

Sealer is a 22% self shine floor sealer. Because of its high concentrate being 22%, it is a very hard wearing, high shine, non-slip floor sealer. When using high percentage floor sealer, it means you save on labor due to the fact that one does not have to polish or apply as often and is longer lasting, as one does not need to strip the polish as often. Method: Strip floor using Solvastrip, apply Sealer 22% with lamb's wool applicator, leave to dry for a minimum of 1 hour, and then apply Shinesolve.

Item Code: F44

Pack Size: 5lt & 25lt

BUFFSHINE:

Buffshine is a buff able floor polish. After self shining one's floor with either Shinesolve 15% or 22% floor polish, one would then use Buffshine on regular bases by spraying as you go with the buffing machine.

Item Code: F46

Pack Size: 5lt & 25lt

PAVE SEAL:

Pave Seal is a concrete floor and paving sealer of high solids. Make sure concrete or paving area is cleaned with acid first i.e. Solvecrete, then rinse and neutralize with alkali, then apply thin seal to surface using soft broom, allow to dry for up to 3 hours, apply second and third coat when necessary.

Item Code: F48

Pack Size: 5lt & 25lt

AUTOSCRUB:

Autoscrub is a cleaner for automatic scrubbing machines. Because of its high alkalinity, it makes for economical use as well as being an excellent sanitizer, diluted at 100: 1. Method: Add 1 liter to 100 liter’s of water.

Item Code: F49

Pack Size: 5lt & 25lt

Back Back to top